adhdlaserfocused
Dragon Wine Bottle Display (3D Print)
Dragon Wine Bottle Display (3D Print)
Regular price
$66.00 USD
Regular price
Sale price
$66.00 USD
Unit price
per
Taxes included.
Reference guide
Available filament colors
Use this chart while choosing your colors. Finished prints can vary a little depending on the filament batch, screen brightness, and how the gradient lands during printing.
- Most made-to-order listings can use these shared filament colors.
- Gradient, rainbow, glow, and silk filaments can look slightly different from item to item.
- If you want help matching parts to colors, leave a note with your order details.
Couldn't load pickup availability
3D Printed Wine Bottle Display/Holder
There is no better way to display a bottle of wine for a party or just as a nice counter decoration until you're ready to pop it open than this Dragon bottle display. It wraps its wings around the wine to keep it safe from enemies, and just looking incredibly cool doing so.
This dragon can hold standard wine bottles around the diameter of 3.2inches in diameter though could go smaller in which it would just have some room to wiggle.
Perfect for campaign nights with your friends, a centerpiece on the table, or just a fun way to display a bottle generally in the kitchen.
PLEASE NOTE: Rainbow filament will not turn out the same every time as it is dependent on where in the roll it is printing. No two prints will have the same gradient of colors with rainbow filament.
Printed with environmentally friendly PLA as it is biosourced and biodegradable by nature.
(PLA is classified as a 100% biosourced plastic: it's made of renewable resources such as corn or sugar cane. Lactic acid, obtained by fermenting sugar or starch, is then transformed into a monomer called lactide. This lactide is then polymerised to produce PLA.) Due to the nature of 3D printing, minor layer lines may be visible, and PLA should be kept away from high heat and direct sunlight to maintain its shape.
Items are shipping primarily in repurposed boxes when we can use them (so don't be surprised to see an old Amazon or filament box), with biodegradable packing peanuts and/or biodegradable and recyclable honeycomb paper for padding.
Please recycle/repurpose where you can!
SAFETY WARNING: Please be aware that 3D printed items may pose potential hazards and risks to children and adults if used improperly or with too much force. Some 3D printed items may have small parts that could be a choking hazard. Please exercise caution and use at your own risk when using 3D printed items. By purchasing and using my products, you acknowledge and assume all risks and liabilities associated with their use.
Thank you for checking out and supporting our small business!
There is no better way to display a bottle of wine for a party or just as a nice counter decoration until you're ready to pop it open than this Dragon bottle display. It wraps its wings around the wine to keep it safe from enemies, and just looking incredibly cool doing so.
This dragon can hold standard wine bottles around the diameter of 3.2inches in diameter though could go smaller in which it would just have some room to wiggle.
Perfect for campaign nights with your friends, a centerpiece on the table, or just a fun way to display a bottle generally in the kitchen.
PLEASE NOTE: Rainbow filament will not turn out the same every time as it is dependent on where in the roll it is printing. No two prints will have the same gradient of colors with rainbow filament.
Printed with environmentally friendly PLA as it is biosourced and biodegradable by nature.
(PLA is classified as a 100% biosourced plastic: it's made of renewable resources such as corn or sugar cane. Lactic acid, obtained by fermenting sugar or starch, is then transformed into a monomer called lactide. This lactide is then polymerised to produce PLA.) Due to the nature of 3D printing, minor layer lines may be visible, and PLA should be kept away from high heat and direct sunlight to maintain its shape.
Items are shipping primarily in repurposed boxes when we can use them (so don't be surprised to see an old Amazon or filament box), with biodegradable packing peanuts and/or biodegradable and recyclable honeycomb paper for padding.
Please recycle/repurpose where you can!
SAFETY WARNING: Please be aware that 3D printed items may pose potential hazards and risks to children and adults if used improperly or with too much force. Some 3D printed items may have small parts that could be a choking hazard. Please exercise caution and use at your own risk when using 3D printed items. By purchasing and using my products, you acknowledge and assume all risks and liabilities associated with their use.
Thank you for checking out and supporting our small business!
